HPT Multi-cylinder Hydraulic Cone Crusher
Shanghai Jianye HPT series multi-cylinder hydraulic cone crusher is a new generation of high-efficiency hydraulic cone crusher based on nearly 30 years of crusher research and development experience, combined with advanced technology at home and abroad, and after several generations of product development and application. Based on the traditional multi-cylinder hydraulic cone crusher spindle fixed, eccentric sleeve around the spindle rotation structure and the principle of lamination crushing, the HPT series has made breakthrough breakthroughs in the equipment structure, which significantly improved the equipment's performance and crushing ability. The supporting design of the hydraulic lubrication system ensures the reliable operation of the equipment, while the operation control is more intelligent and humane.
1.Structural upgrade is more efficient
Based on the unique structure of the fixed spindle and eccentric sleeve around the spindle, the equipment further optimizes the design of the transmission rotating parts and the lubricating seal structure. The equipment has a strong bearing capacity, the installed power reaches the maximum in the same model industry, small size, high efficiency, and low noise. .
2.Full hydraulic control is accurate and reliable
Using full hydraulic control, the equipment uses hydraulic operation from the safety cavity clearing to adjustment and locking. The work is more stable and reliable, and the operation is convenient. Combined with rich practical experience, the structure of the hydraulic system is fully optimized, the adjustment control is more accurate, the automatic protection response is faster, and at the same time, fully automatic operation can be realized.
3. Hydraulic automation integrated equipment control automation
Equipped with an integrated hydraulic lubrication system and a centralized automatic intelligent control system, which saves the cost of hydraulic lubrication and monitors the equipment operation status in real time. The control system is further optimized, the system is more stable and reliable, ensuring the safe and stable operation of the equipment, and the equipment operation is more worry-free and labor-saving.
4.Laminated crushed material has good shape
The principle of lamination and crushing is used to crush materials. By optimizing the equipment and cavity shape, the lamination and crushing efficiency is improved, the crushing efficiency is high, and the wear of the wearing parts is low. , Reduce the production cost of equipment and the entire system.
5.Multi-cavity type conversion
Equipped with multiple medium and fine crushing cavity types, only need to replace a small number of parts such as the corresponding cavity liner, you can switch between the cavity types, combined with the principle of lamination and crushing, to better meet the needs of medium and fine crushing technology to achieve One machine is multi-purpose. The crushing wall and rolling mortar wall are made of high-manganese steel. Due to the change in the shape of the crushing cavity and the protection of the material layer during lamination and crushing, the wear is reduced. The general service life can be increased by 35% to 82% compared to the old-style cone crusher. .
When the HPT series multi-cylinder hydraulic cone crusher works, the motor drives the drive shaft of the equipment through a pulley and a V-belt. The drive shaft drives the eccentric sleeve to rotate around the main shaft through the large and small bevel gears. The fixed cone is sometimes close to and away from the rolling mortar wall. The material is continuously crushed and crushed in the crushing cavity formed by the rolling mortar wall and the crushing wall, and the crushed material is discharged from the lower part.
|model||Cavity||Tight edge feed opening size (mm)||Minimum discharge opening size (mm)||Processing capacity (t / h)||Installed power (kw)|
|HPT100||C1 (super thick)||140||19||50-140||90|
|HPT300||C1 (super thick)||230||25||110-440||250|
|HPT400||C1 (super thick)||295||30||135-630||315|
|HPT500||C1 (super thick)||330||38||220-790||400|
|M (medium)||210||twenty two|
|HPT800||C1 (super thick)||350||38||310-1200||630|