Integrated suspension roller mill
: ＜30mm [Feeding granularity] : <30mm
: 8-40t/h [Production capacity] : 8-40t / h
:该一体式悬辊磨机适用于矿山、冶金、化工、建材等行业多种物料的高细制粉加工，成品粒度最细可达20μm。 [Application field] : This integrated suspension roller mill is suitable for high-precision milling of a variety of materials in mining, metallurgy, chemical, building materials and other industries, and the finest particle size of the finished product can reach 20 μm.
:适用于研磨莫氏硬度不大于9.3级、含水量10％以下非易燃易爆的各种矿石，如重晶石、方解石、大理石、石灰石及陶瓷 [Applicable materials] : Suitable for grinding non-combustible and explosive ore with Mohs hardness not greater than 9.3 and moisture content below 10%, such as barite, calcite, marble, limestone and ceramics
The finished product produced by this mill has a larger particle size range, higher milling efficiency, and has the advantages of easy maintenance and installation and long service life. Compared with the traditional external reducers such as trapezoidal mills, high-pressure mills, European mills, etc. at home and abroad, the airtightness of the machine body is greatly improved, the floor area of the main machine is greatly reduced, and equipment installation requirements Greatly reduced.
1. Built-in reducer, compared with the traditional external reducer of the mill, it can greatly enhance the sealing of the pipeline and save space. The equipment can be directly installed on the ground without complex foundation.
2. There is airflow isolation ring inside the body, which makes the airflow space more reasonable.
3. The grinding ring is segmented and easy to replace.
4. The surface of the grinding roller is repairable, which reduces the running cost.
5. Double feed inlets are used for stable feed and higher output.
6, the main engine speed is adjustable, for different materials, using different speeds, the application is more extensive.
7. The gap between the grinding ring and the grinding ring is adjustable, and can be adjusted according to the fineness of the finished product according to different needs.
When the mill is working, the plum frame and the grinding roller assembly are rotating. The material is uniformly fed into the grinding roller assembly by the feeder, and the blade fixed at the lower end of the assembly and maintaining a certain angle will rotate as the assembly rotates. With a certain wind pressure, the falling material will be ground into a fixed gap between the grinding roller and the grinding ring to be ground into powder. The powder will rise with the air flow in the negative pressure environment and pass through the analysis machine on the top of the mill. After the powder is selected, it will enter the pipeline and gradually run to the powder collector. After a certain amount is accumulated, the discharge valve can be opened for bagging. Residual gas will run to the auxiliary machine of the fan, and will be discharged after being exhausted by the dust collector.
|Model||Ring Dia (mm)||Max.feed in size (mm)||The finest output can reach Min.output size (micron um)||Yield||Power KW||Overal dimensions (A / B / C / D)|
|4/150||1500||15||20||2.5-31||132||2430 * 4200 * 2190 * 2820|
|6/190||1900||30||20||3.5-40||160||2830 * 4300 * 2300 * 3700|
|6/230||1900||35||20||5.5-62||315||2950 * 5200 * 2800 * 4000|