YGM high pressure mill
: ＜30mm [Feeding granularity] : <30mm
: 0.8-21.8t/h [Production capacity] : 0.8-21.8t / h
:该高压磨粉机适用于矿山、冶金、化工、建材等行业多种物料的高细制粉加工，成品粒度最细可达800目。 [Application field] : The high-pressure mill is suitable for high-precision milling of a variety of materials in mining, metallurgy, chemical, building materials and other industries. The finest particle size of the finished product can reach 800 mesh.
:适用于研磨莫氏硬度不大于9.3级、含水量6％以下非易燃易爆的各种矿石，如重晶石、 方解石 、大理石、石灰石及陶瓷 [Applicable materials] : Suitable for grinding non-flammable and explosive ore with Mohs hardness not greater than 9.3 and moisture content below 6%, such as barite, calcite , marble, limestone and ceramics
This high-pressure pulverizer is suitable for crushing over 680 non-flammable and explosive mines, metallurgy, chemicals, building materials and other industries with a Mohs hardness of 9.3 or less and a humidity below 6%. The material is finely pulverized, and the particle size of the finished product is adjusted within the mesh range (the finest can reach 800 mesh). This machine can produce 30-80 mesh coarse powder by adding special equipment.
1. Compared with other mills, the high-pressure mill has an output increase of 10-20% under the same power conditions, and the grinding pressure of the mill rollers on the material is increased by 800-1200kg under the action of a high-pressure spring;
2.9.3 grade mineral materials can be processed and crushed;
3. The high-pressure mill has a wide range of particle sizes, the coarsest particle size can reach millimeters (30 mesh), the particle size can generally reach 0.033 mm (425 mesh), and the finest materials can reach 0.013 mm (1000 mesh);
4. The dust removal effect fully meets the national dust emission standards;
5. Convenient adjustment of high-pressure mill analyzer. The lapping device adopts an overlapping multi-stage seal with good sealing performance.
Technical parameters of high pressure mill
|Grinding roller||Number (number)||3||3||4||5||6|
|Grinding ring||Inner diameter (mm)||780||850||950||1280||1600|
|Feeding degree (mm)||15||20||25||30||35|
|Finished size (milli)||0.613-0.033||0.613-0.033||0.613-0.033||0.95-0.044||1.6-0.045|
|Host power (kw)||18.5||twenty two||37||75||132|
Reference output of high pressure mill
|product code||Finished fineness (mm)|
|Production fineness (ton / hour)|